PowerBoost

De-Coke

Removing the varnish and carbon deposits that accumulate in the engine’s combustion chambers, inlet and exhaust manifolds, has numerous benefits.

PowerBoost

Solution

Rather than strip down your engine to de-coke the combustion chambers all you need to do is apply the Ecotek PowerBoost liquid via your air intake with the engine running for 8 minutes and you can remove the carbon and varnish deposits from inside your engine.

PowerBoost comes in a 600ml aerosol with attachable tubes and full instructions (contained in the cap). Further details are available here.

All you do is inject the contents of the can into the inlet manifold with the engine running over approx 8 minutes (with a break mid way to prevent overheating) and then take your car for a spin - and you'll notice the difference immediately!

As recommended in In Gear Sept 09

Benefits

This will give more engine power, crisper acceleration, better throttle response, higher top speed as well as reduced emissions and improved economy.

There is no substitute for a PowerBoost treatment if you want to make sure your engine is running at peak efficiency and maximum performance. More information - here

Press

 

Click here for the full PowerBoost Tests, Press and Dynos - 10meg PDF

 

PowerBoost Press 

 

"The car picked up far quicker, especially out of corners and the smoothness of the engine was incredible."  Classics Magazine

 

In Gear recommends PowerBoost